No. 977/18, Kandy Road, Bulugaha Junction,
Kelaniya, Sri Lanka.

Tel: +9411 2987860
Fax: +9411 2984099

National Training Course on Radiation Protection for RPOs/Operators working in Diagnostic X-ray facilities

Duration: 03 Days
පාඨමාලා විස්තරය

ශ්‍රී ලංකා පරමාණුක බලශක්ති නියාමන සභාව (නියාමන සභාව) මගින් X-කිරණ යන්ත්‍ර භාවිතය වෙනුවෙන් බලපත්‍ර ලබා දීමේදී එම පහසුකම් භාවිතය සඳහා විකිරණ සේවකයන් (විකිරණ ශිල්පීන් හා විකිරණ ආරක්ෂණ නිලධාරීන්) විකිරණ ආරක්ෂාව හා අදාල ක්ෂේත්‍රය සම්බන්ධව පුහුණුවක් ලබා තිබීම අනිවාර්ය වේ.

විකිරණ සේවකයින්ගේ විකිරණ ආරක්ෂණ දැනුම හා පලපුරුද්ද යාවත්කාලීන කිරීම සඳහා විකිරණ ආරක්ෂාව සම්බන්ධව මෙම පුහුණු පාඨමාලාව සංවිධානය කර ඇත. සියලුම විකිරණ සේවකයන් සෑම වසර පහකට වරක් බැගින් මෙවැනි පුහුණු පාඨමාලාවකට සහභාගිවී තම දැනුම හා පළපුරුද්ද යාවත්කාලීන කරගත යුතුය. එසේ පුහුණුවක් ලබා තිබීම එම නිලධාරීයා විකිරණ සේවකයකු ලෙස කටයුතු කිරීමේදී ඉතා වැදගත් වේ.

ඔබ ආයතනයේ දැනට සේවය කරන විකිරණ සේවකයන් මෙම පුහුණු පාඨමාලාවට සහභාගි කරවා ඔවුන්ගේ දැනුම යාවත්කාලීන කර ගත යුතුය. ඒ අනුව අදාළ අයදුම් පත්‍රය නිසි පරිදි සම්පුර්ණ කර 2026 ජුනි 22 දිනට පෙර නියාමන සභාවට ලැබීමට කටයුතු සිදු කල යුතුය. පුහුණු පාඨමාලාව සඳහා තෝරාගන්නා පුද්ගලයෙකු සදහා පාඨමාලා ගාස්තුව රු. 12,000.00 ක් වේ.

සියලුම සහභාගීවන්නන් සඳහා පාඨමාලාව අවසානයේ සහභාගීත්වය මත පදනම්ව සහතික පත්‍රයක් ලබා දීමට කටයුතු කෙරේ.

දිනය සහ ස්ථානය
  • පැවැත්වෙන දිනය: 2026.08.19 සිට 2026.08.21 දක්වා (දින 03)
  • ස්ථානය: ශ්‍රවණාගාරය, ශ්‍රී ලංකා පරමාණුක බලශක්ති නියාමන සභාව
වැඩිදුර විස්තර සහ සම්බන්ධීකරණය
පාඨමාලා අධ්‍යක්ෂ

කේ.ඡි.කේ.යු. ගමගේ මිය
දුරකථන: 0112987860 / 0718305749
ඊමේල්: This email address is being protected from spambots. You need JavaScript enabled to view it.

පාඨමාලා සම්බන්ධීකාරක

දීපිකා රොද්‍රිගෝ මිය
දුරකථන: 0112987860 (ext. 420) / 0716299682
ඊමේල්: This email address is being protected from spambots. You need JavaScript enabled to view it.

Course Objectives

This comprehensive training program is designed to deliver fundamental and practical competency in biological safety protocols and regulatory mandates. The core focus areas include:

  • Better understanding of the core philosophy and principles of radiation protection.
  • Thorough understanding of regulatory requirements and the international system of radiation protection.
  • Practical mastery over the technical aspects of safety frameworks for workers, patients, and the general public.
  • Deep awareness of the critical importance and practical elements of quality assurance in diagnostic radiology.
  • Fostering and actively developing a robust safety culture among technical radiation professionals.
Course Contents
Lecture 01

Basic Radiation Physics

Atomic structure; Radioactivity; Half-life; Types of radiation (α, β, γ, X-ray, n); Excitation; Ionization, Natural background radiation.

Lecture 02

Interaction of Radiation with Matter

Production of X-rays (Bremsstrahlung radiation, Characteristic X-rays, and X-ray spectrum); Characteristics of radiations (Penetrating ability, HVL, TVL); Radiation interaction with matter (Coherent scattering, Photoelectric effect, Compton effect, Pair production, Photo disintegration).

Lecture 03

Radiation Units & Quantities

Radiation units; Physical quantities; Protection quantities; Operational quantities.

Lecture 04

Biological Effects of Ionizing Radiation

Organization of cell structure and functions, Mechanism of cellular level damages by radiation, cell killing and mutation induction, target theory and linear quadratic models of cell survival, modifying factors of radiation damage, radiation carcinogenesis, dose and dose rate effect, radiation damage and classification, cell division, Direct & indirect actions on cells, Stochastic effects: radiation carcinogenesis- latent period, sensitivity variation among different organs and tissues, age and sex, genetic effects of radiation, doubling dose, risk factor; Deterministic effects, tissue reaction, acute radiation syndrome, damage to individual organs, LD 50/60, management of acute radiation injury.

Lecture 05

International System of Radiation Protection

Categories of Exposure, types of exposure, Concept of occupational risk; Radiation protection principles (Justification, Optimization, Dose limitation), Dose constraints, International Organizations (ICRP, ICRU, UNSCEAR, IAEA, IEC, etc.).

Lecture 06

Radiation Detection and Measurement

Principle of radiation detection; Gas detectors (Ionization chamber, Proportional counter, GM counter); Solid state detectors (Scintillators, Semiconductors, TLDs); Radiation monitoring instruments; Personnel monitoring devices; Area monitoring; Survey meters; Direct reading devices; Calibration and response of radiation monitoring instruments.

Lecture 07

Quality Assurance & Quality Control of Diagnostic X-Ray Machines

Quality assurance program; Quality control test (Collimation & beam alignment test; Timer, kVp & output reproducibility; Timer & kVp accuracy; Determination of HVL for conventional X-ray equipment).

Lecture 08

Shielding and X-Ray Room Design

Purpose of shielding; Shielding design concepts; Radiation shielding parameters; Shielding requirements for construction & problem areas; Verification of shielding (Conducting radiation survey).

Lecture 09

Optimization of Protection in Interventional Radiography and CT

Optimization of protection in interventional radiography; Optimization of protection in CT; Justification & optimization of CT practice; CT dose index & Dose Reference Levels (DRL).

Lecture 10

Optimization of Protection in General Radiography & Mammography

Optimization of protection in Mammography; General radiography & bone density scanners; Factors influencing image quality; Mean Glandular Dose for Mammography.

Lecture 11

Occupational Dose Reduction Methodologies & Monitoring

Personal protective equipment & devices; Factors affecting staff doses; Exposure of staff, patients & public; Personal monitoring & legal requirements; Personal dosimeters; Personal dosimetric quantities; Types of personal dosimetry.

Lecture 12

Introduction to SLAERC Regulatory Program & Enforcement Actions

Regulatory infrastructure; Act; Functions & power of the Council; Safety regulations; Licensing process (Submission of applications, Lack of essential information); Inspection process (Importance for the licensing process); Import/export control; Legal provisions for enforcement; Enforcement actions; Prosecution & punishments; Investigations; Radiation accidents involving X-ray machines; Over exposure.

Lecture 13

Duties & Responsibilities of RPOs and Safety Culture

Management of radiation safety; Implementation of radiation protection procedures; Preparation of local rules; Conduct training and awareness programs for radiation staff and supportive staff; Workplace monitoring; Preparation of reports as required; Investigation of over exposure; Justification of medical exposures; Calibration and maintenance of monitoring and survey instruments; Maintenance and supervision of personnel monitoring services & Safety culture in practice; Safety culture characteristics; promoting and maintaining safety culture.

Fee Description
Amount (LKR)
Training Course Fee (තෝරාගන්නා පුද්ගලයෙකු සදහා පාඨමාලා ගාස්තුව) Rs. 12,000.00

සටහන:

  • තෝරාගන්නා පුද්ගලයෙකු සඳහා පාඨමාලා ගාස්තුව ගෙවීම, ඒ සඳහා අදාළ ඉන්වොයිසිය ලැබීමෙන් පසුව පමණක් සිදුකල යුතුය.
  • පාඨමාලාව පැවැත්වෙන තෙදින තුල දිවා ආහාරය සපයනු ලබන අතර පැමිණීමේ දීමනා හෝ වෙනත් කිසිදු දීමනාවක් නියාමන සභාව විසින් ගෙවනු නොලැබේ.